Digital outputs - relay control and how to remove pull-up resistor (7 pages)
Summary of Contents for LinTronic TT455-RT-238
Page 1
Bang&Olufsen to BOSE 18/28 SERIES II Updated: 2006 June 7’th BOSE LIFESTYLE 18/28 SERIES II http://www.lintronic.dk...
Page 2
The system is designed for owners of a Bang&Olufsen Television, whom wants to use the existing BEO4 to remote control a BOSE LIFESTYLE 18/28. An infrared converter, LinTronic TT455-RT-238 (with BOSE feature enabled) or TT455-RT-003 (dedicated BOSE controller), receives the infrared signals from the BEO4, converts them into an appropriate BOSE infrared signal, and sends it to the BOSE system.
Page 3
Updated: 2006 June 7’th Preparations The LinTronic TT455-RT-238/TT455-RT-003 must be powered by 9 - 18 Volt dc, by an adaptor capable of delivering 350 mA or higher, and must be located so it can receive the BEO4 signals and reach the BOSE system when transmitting.
Page 4
Pause Activate ”STOP” in any mode. Stop Activate ”STOP - STOP” in any mode. The following BOSE features cannot be controlled from the BEO4: MUTE ALL GUIDE 0 - 9 and Standby keep the same functionality in any mode. http://www.lintronic.dk...
Page 5
Volume Down << Volume Up >> HARDDISK - ATAPE / AMEM Open Library Menu Close Library Exit Left << Right >> Down Down Enter YELLOW (BOSE MENU) Arrow left << Arrow right >> Arrow up Arrow down Down Enter http://www.lintronic.dk...
Page 6
Bang&Olufsen to BOSE 18/28 SERIES II Updated: 2006 June 7’th LI GHT RA DIO MODES V TAPE RECORD ATAPE ME NU TE XT MODE SETTINGS > > DVD MENU SPEAKER E XIT LIST STOP http://www.lintronic.dk...
Need help?
Do you have a question about the TT455-RT-238 and is the answer not in the manual?
Questions and answers