Cleaning The Eyepiece - ATN MO2-1 User Manual

• You may need to focus the 35-mm camera or video camera in com-
bination with the riflescope in order to get the sharpest possible
image.
• We suggest that you find an open space to work in. Focus the NV
scope so that the scene is at its sharpest. For the best results you
should disable the auto focus (if any) on either the 35-mm camera
or the video camera and manually focus the 35-mm camera or the
video camera. Once the image is sharp simply adjust the scope's
front lens to change the focus.
• An important thing to remember is that you are not taking a picture
of an object that is far away from you, but you are actually taking a
picture of the phosphorous screen of the AMT MO 2-1 that is only
2-3 inches away.
DOUBLER
Unscrew 90 mm lens off the body of the MO 2-1 (make sure that the
unit is turned off). Screw the doubler into the body of the MO 2-1
where the 90 mm lens was removed. Screw the 90 mm lens into the
doubler.
NOTE: When attaching the doubler do not be afraid to use a little
force.
Standard 90mm
Any "C" mount lens
Standard 90mm
Any "C" mount lens

CLEANING THE EYEPIECE

You may need to clean the eyepiece of the MO 2-1 from time to time
in order to guarantee top performance. When you receive your MO
2-1 you should check for dust on the eyepiece of the unit.
First you will need to remove the eyepiece. To do that you will need to
initially loosen the 2 set screws that can be found on the base. Then
unscrew the eyepiece counter-clockwise to remove it.
NOTE: You do not have to remove the set screws completely, they are
very small and easy to misplace.
CAUTION: Use only Photographic lens cleaning tissue on these sur-
faces. Be careful not to scratch or smudge any of these surfaces.
When using compressed air to blow dust away, make sure to avoid
inverting the can while spraying. This can cause frozen propellant to
exit the can, which can cause serious problems with the glass and
phosphor screen.
lens
lens
Doubler
Camera
adapter
Video
35 mm Camera
4