APPLICATION The MO3-2 Night Vision Monocular is a complex opticoelectronic system for individual use. The device consists of (see above figure) the objective lens assembly, eyepiece and the body. The body contains a 2nd Gen. D-grade image intensifier tube assembly with an integrated high voltage power source and the three volt battery housing.
Photographic lens cleaning tissue. • Keep lens cap/daylight filter on when not in use. • The MO-3 is not harmful to the user or the environment. • Do not disassemble except to clean the front lens and eyepiece: it will void your warranty.
Page 5
(o p t i o n a l) Unscrew 35 mm lens off the body of the MO-3 (make sure that the unit is turned off). Screw the doubler into the body of the MO-3 where the 35 mm lens was removed. Screw the 35 mm lens or your 90 mm lens into the doubler.
• We suggest that you find an open space to work in. Focus the MO-3 so that the scene is at its sharpest. For best results you should disable the auto focus (if any) on either the 35mm camera or the video camera and manually focus the 35mm camera or the video camera.
ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;...