Cleaning The Eyepiece - ATN MO2-1 User Manual

Hide thumbs

Table of Contents

3) You may or may not need a STEP-UP or STEP-

DOWN ring in order to adapt the camera adapter

to your lens.

NOTE: The camera adapter comes with 37-mm and

52-mm threads. If you need other sizes your local

camera store should be able to help.

• Remove the rubber eyecup from the MO2-1.

• Screw the camera adapter onto the front of the lens

on your Video camera lens or your 35-mm camera

lens.

• Loosen the three set screws on the camera

adapter.

• Place the camera adapter over the MO2-1 eye-

piece.

• Tighten the three set screws to fit snugly to the MO2-1 eyepiece.

• You may need to focus the 35-mm camera or video camera in combination with the MO2-1 in

order to get the sharpest possible image.

• We suggest that you find an open space to work in. Focus the MO2-1 so that the scene is at its

sharpest. For the best results you should disable the auto focus (if any) on either the 35-mm

camera or the video camera and manually focus the 35-mm camera or the video camera.

Once the image is sharp simply adjust the MO2-1 front lens to change the focus.

• An important thing to remember is that you are not taking a picture of an object that is far away

from you, but you are actually taking a picture of the phosphorous screen of the MO2-1 that

is only 2-3 inches away.

doubler

Unscrew 90 mm lens off the body of the MO2-1 (make sure that the unit is turned off). Screw

the doubler into the body of the MO2-1 instead of the 90 mm lens. Screw the 90 mm lens into

the doubler.

Standard 90mm

Any "C" mount lens

Standard 90mm

Any "C" mount lens

NOTE: When attaching the doubler do not be afraid to use a little force.