Page 1
ATN MO-4 NIghT VIsION MONOculAR MO-4 user’s guide (rev. 3, May 2010) u s e r ` s g u i d e Important Export Restrictions! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the u.s.
Focus ........5 m to ∞ Weight ............0.8 kg Power supply ......2x 3 Cr123a type * aTN reserves the right to change the above specifications at any time without notice ApplIcATION The Night vision Monocular is a complex opticoelectronic system for individual use. The device consists of the objective lens assembly, eyepiece and the body.
Page 4
3. When ir is ON the ir led is orange. NOTE: Only for MO-4 with 1st Gen. tube. You may notice a persistent green glow for up to five (5) minutes after you have turned the unit off. This is normal for the 1st Gen. light intensifier tube.
Page 5
• We suggest that you find an open space to work in. Focus the MO-4 so that the scene is at its sharpest. For the best results you should disable the auto focus (if any) on either the 35mm camera or the video camera and manually focus the 35-mm camera or the video camera.
ThE EyEpIEcE you may need to clean the eyepiece of the MO-4 from time to time in order to guarantee top performance. When you receive your MO-4 you should check for dust on the eyepiece of the unit. First you will need to remove the eyepiece. To remove the eyepiece you will need to ini- tially loosen 2 set screws that can be found on the base.
Need help?
Do you have a question about the MO-4 and is the answer not in the manual?
Questions and answers