Aib-2000 Web Interface; Default Access Credentials; Resetting Aib-2000 To Default Factory Settings - GDC AIB-2000 User Manual

AIB-2000 WEB INTERFACE

11 AIB-2000 WEB INTERFACE
The AIB-2000 provides a user with a web interface to access its controls. AIB-2000 must be connected to a
wired or a wireless network via the ETH port. The device used for accessing the web interface must be in the
same network as the AIB-2000.

11.1 Default Access Credentials

Default factory network settings for AIB-2000 are as follows:
▪ IP Address: 192.168.0.8
▪ Network mask: 255.255.255.0
▪ Gateway: 192.168.0.1
▪ Username: Please contact GDC for the user name and password of the web interface
▪ Password: Please contact GDC for the user name and password of the web interface

11.2 Resetting AIB-2000 to Default Factory Settings

To reset the IP address to default, turn off the AIB-2000, press and simultaneously hold 7.1 ANALOG and
AES/EBU buttons and turn on the device. Wait until all three Selector LEDs are lit and then release the
buttons.
USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX
User Manual
Figure 6: Reset to Default Factory Settings
- 17 -
st
April 01 , 2021