Rear Panel; Output; Aes/Ebu In; Ethernet In - GDC AIB-2000 User Manual

AIB-2000 CONNECTIONS

9.5 Rear Panel

The rear panel houses 7.1 Output Phoenix connections, AES/EBU RJ-45 connector, Ethernet RJ-45
connector, LCR mon, H/I, V/I outputs, 7.1. input RCA connectors and 2 x RCA NON-SYNC connectors, as
shown in Figure 5.
8 x 3-pin Phoenix connectors provide analog output for connection to Analog amplifiers. Source of
the 7.1. output is selected by SELECTOR switches on the front.
AES/EBU RJ-45 connector receives the AES/EBU stream which can be routed to 7.1. output by
selecting the AES/EBU button on the front. Refer to Section 4 for the correct wiring of the
AES/EBU RJ-45 socket.
Ethernet RJ-45 connector receives the control automation signals from the media server. Refer to
Section 4 for the correct wiring of the Ethernet RJ-45 socket.
LCR mon provides monitoring output which is received from the AES/EBU stream. Please note
that the LCR mon output provides a L+C+R summation of the AES inputs to the AIB-2000.
H/I and V/I outputs are extracted from AES/EBU stream and provides for cinema-goers with
hearing and vision difficulties.
USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX
User Manual
Figure 5: Rear Panel of AIB-2000

7.1 Output

AES/EBU in

Ethernet in

LCR mon

H/I and V/I

- 14 -
st
April 01 , 2021