GDC AIB-2000 User Manual page 10

SAFETY INSTRUCTIONS
Read these instructions carefully.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this equipment near water.
5.
Clean only with a dry cloth.
6.
Do not block any ventilation openings. Install in accordance with the manufacturer's
7.
instructions.
Do not use near heat sources such as stoves, heat registers, radiators or other equipment
8.
(including amplifiers) that produces heat.
Do not use the unit near open fire sources.
9.
Connect the unit only to the electric network with grounding. Use only electric plugs
10.
that provide grounding.
Protect the power cord from being walked on, pinched or otherwise damaged.
11.
Use only accessories specified by the manufacturer.
12.
Unplug this unit during lightning storms or when unused for long periods.
13.
Refer all servicing to qualified service personnel. Servicing is required when the system has
14.
been damaged in any way, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does
not operate normally or has been dropped.
WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
15.
THIS SYSTEM UNIT TO RAIN OR MOISTURE.
THIS UNIT CONTAINS POTENTIALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC
SHOCK OR HAZARD, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
INSTALLING OF THIS UNIT MUST BE PERFORMED ONLY BY QUALIFIED TRAINED
PERSONNEL FOLLOWING APPLICABLE SAFETY RULES. DO NOT ALLOW INSTALLING OF
THIS UNIT IF INSTALLATION HARDWARE IS BROKEN, BENT, PARTS ARE MISSING OR IS
OTHERWISE DAMAGED.
USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX
User Manual
IMPORTANT SAFETY INSTRUCTIONS
- 9 -
st
April 01 , 2021