Advertisement
Operation
S W IN G
Operation
1
For each press of "
displays as follows according to
different operation modes:
COOL/DRY:
HEAT:
SM ART:
Initial state
2
For each press of "
displays as follows:
remote controller:
Initial state
When humidity is high, condensed water might occur
at air outlet if all vertical louvers are adjusted to left or
right.
position for a long time in COOL or DRY mode,
otherwise, condensed water might occur.
" button, air
" button, remote controller
.
TIM ER Operation
Set Clock correctly before starting Timer operation. You can
let unit start or stop automatically a following times: Before
you wake up in the morning, or get back from work or
after you fall asleep at night.
1
1
TIM ER
2
1 min, if kept depressed, it will increase rapidly. It can be
adjusted within 12 hours.
3
ON
OFF
"
" or "
"
To cancel TIM ER mode
APPLY
J ust press
Select your desired operation
mode.
Select your desired
TIM ER ON.
TIMER ON
Remote controller: "
Select your desired
TIM ER OFF.
TIMER OFF
Remote controller: "
Time setting.
Every time the button is pressed,
time setting increases or decreases
APPLY
button TIM ER dispiay disappear.
"
"
8
Advertisement
