Chapter 2 Connections And Setup; Tv Buttons; Initial Setup - TCL androidtv C725 Series Operation Manual

Chapter 2

TV Buttons

- Power button
If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one
You can turn on the TV by pressing the
While the TV is on, press the
multi-function menu, please refer to the figure below.
CH+
Standby
Tips: Short click to change, long click to select.
• Press to move the highlight to the next function selection
• Press and hold the button for more than 2 seconds to confirm your selection.
Note:
You can follow the on-screen guide to operate. Figures and illustrations are provided for reference only and may
vary depending on the model.
ON
- MIC switch
or
OFF
The MIC switch is located next to the power button. If you want to use the feature of hands-free TV voice control,
turn on the switch (not available for some models).

Initial Setup

The first time you switch the set on, you will be prompted to pair the remote with the TV. Keep the remote control
and TV in 1 meter, and follow the on-screen guide for pairing. Then the Welcome wizard appears, which guides you
through the initial setup process. Follow the on-screen instructions to finish the initial setup process such as selecting
the language, connecting to the network, and more. During each step, either make a choice or skip the step. If you
skip a step, you can perform the setup later from the settings menu.
Note: After finishing pairing the remote, you can use the Google Assistant button. If you skip remote pairing,
you will be prompted to pair the remote with the TV again when you use the Google Assistant button for the
first time.
button. It may work just as Power on/Standby button, or as a multi-function controller.
button on the TV set.
button to display the multi-function menu. More information about how to use the
CH- Volume+ Volume-
ON
OFF
Connections and Setup
Source OK
4