Password In Parental Control; Using The Hands-Free Tv Voice Control - TCL androidtv C725 Series Operation Manual

2. Press ▲/▼ to select Factory data reset and press
OK to enter. Then select Erase everything and
press OK to confirm.
3. Enter 1234 or the PIN according to the on-screen
prompt.
4. Select OK and press OK to confirm.
5. The Pair Your Remote page appears. Follow the
instructions in the section Initial setup.

Password in Parental Control

- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.

Using the Hands-free TV Voice Control

(* not available for some models)
Before using the hands-free TV voice control, connect the
TV to the network and make sure it can access the Goo-
gle website first. Then follow the steps below to access.
1. Turn the built-in MIC switch (next to the power button)
to on before using this function.
2. Access the Android TV homepage by pressing
the remote control.
(Settings) > Quick Settings > "Ok Google"
3. Select
detection and press OK to turn it on. You can also set
it by selecting (Settings) > Device Preferences >
Google Assistant > "Ok Google" detection.
4. Say "OK Google" to activate it.
Notes:
- The availability of hands-free TV voice control
depends on your region/country/language and your
model. For details, please refer to your local dealer.
- A quiet surrounding is required for better function
when using it. The recommended using distance is
within 2 meters in front of TV set.
- Turn the built-in MIC switch to off if you are not going
to use it. Or set the "Ok Google" detection to off.
- Standby power consumption will increase because
the built-in MIC is always listening when the Google
Assistant or voice control with the built-in MIC is
enabled.
Using more of your TV
on
15