Time Shift; Pvr(Personal Video Recorder) - TCL androidtv C725 Series Operation Manual

2. Select Add accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV) uses
2.4GHz frequency thus close proximity to Wi-Fi access
points, routers or microwave ovens might interfere with
Bluetooth audio streaming. If you face interruptions
in audio reception, you should restart your Bluetooth
device to find frequency with less interferences and if
you continue to face issues you should move closer
to TV or increase space between TV and source of
interferences.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by TCL is under license. Other trademarks
and trade names are those of their respective owners.

Time Shift

(* not available for some models)
Allows you to pause, fast forward and rewind live TV,
so you don't have to miss any part of your favourite
programmes. Before you use the function, connect a
USB drive to the TV first. For the first time, you should
complete the disk setup for the USB drive.
Press on the remote control and select Time shift,
then press OK/► to confirm. (Note: This option is
available only when Time shift is set to on. Press
the remote control, press ▲/▼ to select TV settings >
Channel > Time shift, press OK to toggle on.)
1. Follow the directions on the screen to do the disk
setup if you use time shift for the first time.
2. After the disk setup is done, time shift will start, and
the time shift menu displays on the screen.
3. When the time shift menu disappears and only the
timing of the time shift remains on the screen, you
can press OK to call out the time shift menu and
operate according to the on-screen prompt.
4. Press
button on the remote control to stop the time
shift and exit. (To access the buttons on the time shift
menu, you need to press
control to display the virtual remote control keyboard
first.)
Notes:
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for time shift,
the bigger the recording length.
on
button on the remote
Using more of your TV
PVR (Personal Video Recorder)
(* not available for some models)
Allows you to record your favourite TV programmes.
Before you use the function, connect a USB drive to the
TV first.
Note: The feature is available only in selected products
and, due to specific TV network limitations and country
technical requirements, might not be available in product
or place of installation. Feature might also be blocked
by TV network due to copyright protection (HD content,
recording protection). Please use
control to check if the feature is available in your product.
1. Press on the remote control and select PVR.
2. Press OK/► to enter and select Record. It starts to
record automatically.
3. Press blue button to access Settings and use
▲/▼/◄/► to adjust the recording duration.
4. Press OK or to stop recording manually,
the recorded file will be saved. In normal
operation, the recording will stop automatically
when the recording duration expires.
Note: To access the blue button or , you need
to press button on the remote control to
display the virtual remote control keyboard first.
5. In recording, the PVR mini pane will also show on
the screen to indicate the recording progress.
6. To watch the recorded programme, exit PVR mode
first.Press and select PVR > PVR list, then select
the related record file. Press OK to play. (It is the
same if you record a digital radio programme.)
Notes:
- This feature is available only for digital non encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source during
recording, store the recording data before changing
the channel or source.
- The TV cannot play files normally if the parameters of
the file exceed the limitations of the system, the file
format is not supported, the file is damaged, or the
file cannot be decoded.
- Do not disconnect the USB drive when the system
is reading a file or transmitting data, otherwise the
system or the drive may be damaged.
13
on the remote