Page 3
Instruction Manual SB-800 Subwoofer Rear Panel Figure 1 LOW-PASS STANDBY AUTO LOW-PASS BYPASS 220-240V 110-120V FOR 110-120VAC, USE T1.0AL 250V FUSE FOR 220-240VAC, USE T1.6AL 250V FUSE Bass Level Control Use this control to set the level of bass desired Status LED This will be green for "on"...
Input cable not securely connected or defective. Ground loop through antenna or cable TV system input. Model SB-800 Powered Subwoofer NOTE: Set this control to "Bypass" if you are using STANDBY PHASE STATUS a receiver that has its own subwoofer crossover.
Need help?
Do you have a question about the SB-800 and is the answer not in the manual?
Questions and answers