Home Setup - Wifi Network - LightBug Zero User Manual

Home Setup - Wifi Network

If your device is often at home, disabling motion detection
when in range of your home Wi-Fi network can help increase
battery life. All you need to do is enable this feature and
input your network name.
Caution: There may be a delay between your device leaving
home and motion detection be re-enabled. Do not use this
setting if you need fast alerts.
Note: These settings are automatically saved and will be
applied at the next location update. Alternatively. to apply the
new settings immediately, press the button on your tracker for
3 seconds.
31 79
Page of
LightBug User Manual