Step 2: Select The Device Mode - LightBug Zero User Manual

Step 2: Select the device mode

There are two device modes available in Easy Mode, you will
need to pick the one best suited to your use case:
1) "Long Battery Life" - which disables motion detection and
switches the device to a fixed update mode. You will receive
updates at fixed intervals, regardless of whether or not the
tracker has moved.
2) "Motion Tracking" - which enables motion detection on
your device. It works great if you want to receive an alert
when the tracker moves or if you need to see more refined
information about where your tracker has been.
Caution: This mode does drain the battery faster.
Note: You will need to be on the Unlimited Data Plan to utilise
this mode.
If you decide that the "Long Battery Life" mode is best for
you then follow the steps directly below. If you would
prefer the "Motion Tracking" mode skip to the specific
steps for that plan.
19 79
Page of
LightBug User Manual