Hartzell HC-D2MV20-3 Series Owner's Manual And Logbook page 74

(e) Attach the propeller pitch control cable to the
(2) Propeller installation
WARNING:
(a) Clean the engine case, where the hydraulic unit
APS0212A
Standard Torque Wrench
(actual torque required) X (torque wrench length)
(torque wrench length) + (length of adapter)
EXAMPLE:
100 Ft-Lb (136 N•m) x 1 ft (304.8 mm)
1 ft (304.8 mm) + 0..25 ft (76.2 mm)
Determining Torque Value When Using Torquing Adapter
INSTALLATION AND REMOVAL
Propeller Owner's Manual
hydraulic valve lever on the long end that extends
from the valve spool.
CLEANING AGENT MEK IS
FLAMMABLE AND TOXIC TO THE
SKIN, EYES AND RESPIRATORY
TRACT. SKIN AND EYE PROTECTION
ARE REQUIRED. AVOID PROLONGED
CONTACT. USE IN A WELL
VENTILATED AREA.
cylinder mounts, with Quick Dry Stoddard Solvent or
MEK. Remove any remaining gasket material from
previous installations.
1.00 foot
(304.8 mm)
Figure 3-2
140
Torque wrench reading
= to achieve required actual
torque
= 80 Ft-Lb
<
(108 N•m)
61-00-40
Torquing Adapter
0.25 foot
(76.2 mm)
reading on torque
wrench with 3-inch
(76.2 mm) adapter for
actual torque of 100
Ft-Lb (136 N•m)
Page 3-10
Rev. 2 Jun/12