Hartzell HC-D2MV20-3 Series Owner's Manual And Logbook page 137

CAUTION:
(j) Reinstall a washer and lock nut on the threaded end
of each push rod to prevent the sleeve and spacer
from loss during disassembly.
(k) Remove the pitch change block from each blade
clamp link screw.
WARNING:
CAUTION:
(l) Using a support sling, remove the propeller from the
engine splined shaft and lift the propeller from the
engine.
(m) Remove the rear cone from the engine shaft.
(n) Remove the spacer(s) from the engine shaft.
(o) Place the propeller and associated parts on a cart for
transportation.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
MAKE SURE THE SLEEVE AND THE
SPACER ON EACH PUSH ROD REMAIN
ON THE PUSH ROD AND ARE NOT
LOST.
USE A SUITABLY RATED SLING TO
SUPPORT THE WEIGHT OF THE
PROPELLER ASSEMBLY DURING
REMOVAL.
USE ADEQUATE PRECAUTIONS
TO PROTECT THE PROPELLER
ASSEMBLY FROM DAMAGE WHEN IT
IS REMOVED FROM THE AIRCRAFT
ENGINE AND WHEN IT IS STORED.
61-00-40
140
Rev. 2 Jun/12
Page 3-71