Brodit 272011 Quick Start Manual

Passive holder with tilt swivel

Product 272011

272011 Passive holder with tilt swivel

More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will

always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The holders can

be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

EAN: 7320282720117

Item no 272011 fits:

Navigon 2100 (For all countries)

Navigon 2110 (For all countries)

Table of Contents

Need help?

Do you have a question about the 272011 and is the answer not in the manual?

Page 1 4 June, 2021, www.brodit.com, © 2021 Brodit AB Product 272011 272011 Passive holder with tilt swivel More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen.
Page 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the attaching part on the back. 2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part.