Page 1
The mounting plate is equipped with predrilled holes which make the installation of equipment on the ProClip easier. The holes suit all Brodit holders and other products with standard holes, the hole pattern constists of one set of AMPS-holes as well as two sets of double-holes placed in different height.
Page 2
INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before installing the ProClip. Important! This ProClip will cover the 12V socket on top of the dash, there will be approximately 40mm between the socket and the ProClip. The ProClip can also be placed on the right airvent. 1.