Brodit 216025 Installation Instructions

Product 216025

216025 Passive holder with tilt swivel With swiveling top support for an extra firm installation.

The choice for you who want to have you PDA firmly in place, properly attached and still within easy reach. The

holder has a strong, robust design to withstand rough handling in professional use. The swiveling top part keeps

your device extra securely in place in the holder, it "locks" the device in the holder so that it can not shake the

least. It is easy to place the PDA in the holder, and to take it with you when leaving the vehicle. You can attach e.

g. a charging cable to the device while in the holder. The holder is equipped with a tilt swivel so you can easily

adjust the angle for good viewing. Attach onto a ProClip Mounting Platform or a Pedestal Mount.

EAN: 7320282160258

Item no 216025 fits:

Xplore M6 (For all countries)

Xplore M60 (For all countries)

Zebra M6 (For all countries)

Zebra M60 (For all countries)

Table of Contents

Need help?

Do you have a question about the 216025 and is the answer not in the manual?

Page 1 12 March, 2020, www.brodit.com, © 2020 Brodit AB Product 216025 216025 Passive holder with tilt swivel With swiveling top support for an extra firm installation. The choice for you who want to have you PDA firmly in place, properly attached and still within easy reach. The holder has a strong, robust design to withstand rough handling in professional use.
Page 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.