Preventing material damage
2 Preventing material
damage
Preventing material damage
ATTENTION!
The high weight of the appliance may
damage the floor when it is moved.
Use a trolley and floor protection
▶
when moving the appliance.
When the appliance door is closed,
an open door pillar may damage the
appliance.
Never open the door pillar manu-
▶
ally.
If the door pillar has been opened,
▶
close it before closing the appli-
ance door.
Using the base, runners or appliance
doors as a seat surface or climbing
surface may damage the appliance.
Do not stand or support yourself
▶
on the base, runners or doors.
If the water pressure is too high or
too low, the appliance may not be
able to operate properly.
Make sure that the water pressure
▶
in the water supply system is at
least 200 kPa (2 bar) and max.
800 kPa (8 bar).
If the water pressure exceeds the
▶
maximum value specified, a pres-
sure-reducing valve must be in-
stalled between the drinking water
connection and the hose set of the
appliance.
Modified or damaged water hoses
may result in material damage and
damage to the appliance.
Never kink, crush, modify or cut
▶
through water hoses.
Only use the water hoses supplied
▶
with the appliance or genuine
spare hoses.
Never re-use water hoses that
▶
have been used before.
Never pull on the water hose on
▶
the rear panel of the appliance.
Preventing material damage en
Contamination with oil or fat may
cause plastic parts and door seals to
become porous.
Keep plastic parts and door seals
▶
free of oil and grease.
Metal or metal-style parts in the appli-
ance may contain aluminium. Alu-
minium reacts when it comes into
contact with acidic foods.
Do not store unpackaged food in
▶
the appliance.
Environmental protection and saving energy
3 Environmental protec-
tion and saving energy
Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
3.2 Saving energy
If you follow these instructions, your
appliance will use less power.
Selecting the installation location
Keep the appliance out of direct
¡
sunlight.
Install the appliance as far away as
¡
possible from heating elements,
cookers and other heat sources:
– Maintain a 30 mm clearance to
electric or gas cookers.
– Maintain a 300 mm clearance to
oil or solid-fuel cookers.
Never cover or block the exterior
¡
ventilation grilles.
Saving energy during use
Note: The arrangement of the fittings
does not affect the energy consump-
tion of the appliance.
9