Video Configuration - FrontRow LessonCam 12X Configuration Manual

1) Local Configuration
Video Preview Mode: For video preview, the user can choose between either real-time or fluency priority. Real time
priority mode features less delay, while fluency priority mode features cleaner fluency. Set this based on your needs
(Default values are: real time normal (2), real time best (1), fluency normal (3), fluency good (4) and fluency best (5)).
Recording packing time (in minutes): Set the recording video packing time (default is 10, range is from 1~120 minutes).
Recording/Snapshot file storage route: Set the local recording video/snapshot file storage route. (Default D:\MyIPCam\)
Click the Save button to make settings effective.
2) Audio Configuration
Switch: Choose to enable the audio or not.
Compressing Format: Set the audio compressing format, and the device will reboot automatically after change (default
MP3, PCM, AAC options)
Sampling Frequency: Set the sampling frequency, and the device will reboot automatically after change (default 44100,
16000, 32000, and 48000 options).
Sampling Precision: Set sampling precision (default 16bits)
Compressing Code Rate: Set the audio compressing code rate (default 64bits, 32, 48, 96, 128bits optional)
NOTE: Click "Save". It will remind you that "Enable has changed. Restart the device to take effect after the success of
the save." Then please reboot the camera to make new settings take effect.

4.2.5 Video Configuration

1) Video encoding
Code Stream: Stream: For different video output mode settings, use different streams. (Main stream or secondary stream).
Compression Format: Set the video compression format, then save and reboot for it to take effect (primary/secondary
stream default: H.264, H.265 optional).
Profile: Profile Mode Setting (Default HP, BP, MP options).
Video Size: Set the video image resolution, then save and reboot for it to take effect (main stream default 1920x1080 or
1280x720 options; default secondary stream 640x320, 320x180, 1280x720, 1920x1080 options).
Stream Rate control: Set the rate control mode, save and reboot for it to take effect (Primary/secondary stream default
variable bit rate, fixed rate options).
Image Quality: Set the image quality. Image quality can be changed only when rate control is variable bit rate (the main
stream default features the best quality, while secondary stream default is not as clear. Options are best, better, good,
bad, worse, and worst).
Rate (Kb/s): Set the video bit rate (main stream default 4096Kb/s, 64-12288Kb/s options; secondary stream default
1024Kb/s, 64-10240Kb/s options).
Frame Rate (F/S): Set the video frame rate (primary/secondary stream default 25F/S, primary stream 5-60F/S option,
secondary stream 5-30F/S option).
Key Frame Interval: Set the key frame interval (primary/secondary stream default 75F, primary/stream 1-300F option,
secondary stream 1-150F optional).
Stream Name: When streaming via rtsp or rtmp, user can modify the stream name. Main Stream (live/av0), sub stream
(live/av1).
Click the "Save" button to display the "saved successfully" message, and then the settings will take effect.
2) Stream Release
Switch: To turn On/Off the main/secondary stream.
Protocol: Primary/secondary stream applies RTMP protocol.
Host Port: Server port number (default 1935, 0-65535 optional).
Host Address: Server IP addresses (default 192.168.5.163).
Stream Name: choose a different stream name (live/av0, live/av1 options).
User: Set the user name.
Password: Set the password.
13
HD Color Video Camera User Manual