Table of Contents
Advertisement
Activating MyPal
You need to properly calibrate and activate your device before using it.
This process ensures accurate positioning when entering text and
selecting menus.
Calibrating and activating your device
1. Press the power button.
2. The Welcome screen appears when you
turn on the device for the first time, or
after performing a hard reset. Tap
anywhere on the screen to continue.
NOTE
3. Tap the center of the cross to perform
the align screen process. You may have
to do this step a few times to properly
calibrate.
NOTE
4. Follow the succeeding on-screen
instructions.
5. Tap anywhere on the Complete screen
when you are done with the alignment
and settings. You are now ready to use
your device.
8
To perform a hard reset, press
and hold the power button while
you press the tip of the stylus on
the reset switch.
To launch the Align Screen
function at any time, tap
Settings > System tab > Screen
icon > Align Screen button.
Power button
>
SD
Chapter 1
Advertisement
Table of Contents
