Installing And Removing The Battery; Connecting To A Power Source - Asus MyPal A632 User Manual

Installing and removing the battery

1
3
NOTE Opening the battery cover automatically turns off the power.
There is a mechanism at the upper left side of the battery
compartment that switches the power off automatically when
you slide out the battery cover. This is a safety measure for
protecting the power circuitry, so please make sure not to
lose the battery cover.

Connecting to a power source

IMPORTANT You need to charge the battery before using the device for
2
26-pin device plug
Sync cable adapter
AC adapter/ Power cable
NOTE As soon as the power cable is connected to a power source,
the battery will start charging and the power LED will show a
steady red light. See "Changing the battery power settings"
in Chapter 2 on how to display the battery power status.
Getting Started
the first time.
1
2
4
USB sync
cable
3
5