A-Video Board Block-1 - Sony STR-ZA1000ES Service Manual

STR-ZA1000ES/ZA2000ES/ZA3000ES
Ver. 1.1

2-15. A-VIDEO BOARD BLOCK-1

(ZA3000ES)
AUDIO board
A-VIDEO board
cable tie
cable tie
4 Cut the
cable tie.
4 Cut the cable tie.
Note: During reassembly, use new cable
ties to fasten the wires back in place
as they were before disassembly.
cable tie
cable tie
cable tie
18
(ZA1000ES/ZA2000ES)
1 Remove the wire
from the lead pin.
A-VIDEO board
lead pin
AUDIO board
2 Remove the wire
from the clamp.
lead pin
A-VIDEO board
clamp
A-VIDEO board
3 Remove the wire
from the lead pin.
(See Fig. E)
4 Cut the cable tie.
(See Fig. D)
4 Cut two cable ties.
(See Fig. D)