Sony STR-ZA1000ES Service Manual page 126

STR-ZA1000ES/ZA2000ES/ZA3000ES
REVISION HISTORY
Ver. Date
1.0 2014.07 New
1.1 2014.11 Addition of STR-ZA1000ES
Change of DISPLAY, M_VOL, POWER_KEY, PRE-OUT and STBY boards (Suffi x-12)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Description of Revision
, follow the procedure below.
(SMR-14028)