Microsensor MPM480 Operation Manual page 12

b) Transmitter installation should meet the requirement as below:
1) The cap must be tightened, and there are at least 6 joggles.
Do not damage the thread.
2) The explosion proof's construction and components of Exd
version's transmitter are examined seriously before out of
factory, so do not scratch the joint surface, make it rough and
all the explosion proof components can not be provided by
yourself when using them. If they are damaged, please order
them from the factory timely.
3) Please lead the cable to a safety area to divide the cable core
for connection. Do not divide the cable core for connection
midway.
5 Unpacking,Components and Storage
5.1 Unpacking
a) Be sure the package is completed, and the package should be put
as the sign "UP".
b) Be sure unpacking carefully, and prevent damaging instruments or
accessories. Pay attention to the housing jacket and rubber
bushing of transmitter cable.
5.2 Enclosed
The transmitter should be enclosed when out of factory：
MPM480 pressure transmitter
Special Plug
1
1(due to the order)
11