Yeelight YLDP23YL User Manual page 21

EN
Warnings
1. Before using this product, please make sure that your voltage is appropriate for the
working voltage of this product. Using this product with a voltage other than the one
speci ed may damage the product and cause safety hazards.
2. Do not disassemble this product, as the light diodes can cause damage to the eyes.
3. The light bulb will heat up when working. Do not use it in a con ned holder for an
extended period of time. Ensure su cient ventilation for the light bulb to allow for
heat dissipation.
4. The optical radiation of this LED light product complies with the "Exemptions and
Requirements"of IEC 62471-2006.
5. For indoor use only.
6. Disconnect power before installation to prevent risk of electronic shock.
7. Use in dry locations only.
8. The light source of this product is irreplaceable light diodes (LED).
9. This device is neither intended for use with emergency exits nor intended for
emergency lighting.
10. Only use the control provided with or speci ed by these instructions to control this
lamp. This lamp will not operate properly when connected to a standard
(incandescent) dimmer or dimming control.
11. For lamps with a weight signi cantly higher than that of the lamps for which they are
a replacement, attention should be drawn to the fact hat the increased weight may
reduce the mechanical stability of certain luminaires and lampholders and may
impair contact making and lamp retention.
19