Install or Upgrade Edgeware Applications
Some Edgeware applications, such as the JamVM, are not installed on your reader.
You can easily download, install, or upgrade your Edgeware appli-cations through
the web browser interface.
1. Log in to the web browser interface and click Edgeware Applications > Install
2. Click Browse to browse to the location of the firmware file, and then double-
3. Click Install. The Edgeware application is installed on the reader. When the
Developer Tools
Developer Tools are used for basic testing of your RFID system. You can:
•
•
•
Read RFID Tags through the Demo Application
Use the demo application to verify that your reader can read RFID tags.
1. Log in to the web browser interface and click Edgeware Applications > Appli-
2. If the Developer Tools are not enabled, click
3. Click Developer Tools > Reader Demo.
4. Place a tag near the antenna and then click Start.
Send BRI Commands
Use the Developer Tools to easily send BRI commands through the web browser
interface.
1. Log in to the web browser interface and click Edgeware Applications > Appli-
2. If the Developer Tools are not enabled, click
3. Click Developer Tools > BRI Commands.
4. Enter a BRI command in the Command field and then click Run. The command
IF1C Fixed RFID Reader User Guide
Edgeware.
click the file.
installation is complete, the reader reboots.
Read RFID tags through the demo application
Send BRI commands
Run BRI scripts
cation Control. The Application Control screen appears.
cation Control. The Application Control screen appears.
is executed and a value is returned.
.
.
27