Chapter 2 - Configure The Reader; Configure Ethernet Settings; Ethernet Settings - Honeywell IF1C User Manual

CHAPTER
2
CONFIGURE THE READER

Configure Ethernet Settings

To use the reader, you need to configure Ethernet settings such as your IP address
and subnet mask.
Note: If DHCP is enabled, you may not need to configure Ethernet settings. For more
information, contact your network administrator.
1. Log in to the web browser interface and click Network Configuration or Ether-
net.
2. Configure the settings.
3. When you are finished, click Activate Changes to save your changes.

Ethernet Settings

You can configure these Ethernet settings for your reader to communicate with
your network.
Setting
Enable DHCP
IP Address
Subnet Mask
IF1C Fixed RFID Reader User Guide
Description
Select this field if you want the reader to get its IP address from a DHCP
server.
If this field is not selected, you need to specify the IP address, subnet
mask, and IP router for your network.
The IP address of the reader. The IP address has the form x.x.x.x, where x
is a number from 0 to 255. The default MAC address is on the label on the
side of the reader.
If DHCP is enabled, the currently assigned IP address appears in this
field.
If DHCP is disabled, specify the IP address in the entry field.
The subnet mask for this network. The subnet mask has the form x.x.x.x,
where x is a number from 0 to 255.
If DHCP is enabled, the currently assigned subnet mask appears in this
field.
If DHCP is disabled, specify the subnet mask in the entry field.
9