Table of Contents
Advertisement
Setting
Secure Server Enable
Unsecure Server Enable
Download Intermec
Extensions Definition
Reader Initiated
Connections
Configure Security
To make sure the reader is secure, change your security settings when you set up
your reader. You can secure the reader by:
•
•
•
Change User Credentials
If you are not using a password server to authorize user logins to the reader,
change the default user name and password.
1. Log in to the web browser interface and click Security > Passwords.
2. Configure the User Credential settings.
3. Click Activate Changes to save your changes.
User Credential Settings
User Credential settings control the user name and password you use to log in to
the reader.
Setting
Username
Password
IF1C Fixed RFID Reader User Guide
Changing user credentials
Enabling a RADIUS server
Enabling or disabling serial configuration
Description
Allows connections to the secure LLRP server on port 5085.
Allows connections to the unsecure LLRP sever on port 5084.
Downloads an XML file that describes Honeywell-specific extensions for
the LLRP protocol.
For reader-initiated TCP/IP connections to a remote LLRP client.
•
Client address - The IP address of the remote LLRP client.
•
TCP port - Port number for the TCP/IP socket connection.
•
Enable security (TLS) - Select this option to enable Transport Layer
Security for this TCP/IP connection.
Description
The user name to log in to the reader. The user name can be from 1
to 32 characters long. You must always specify a user name. Default
is
.
intermec
The password to log in to the reader. This password gives you both
read and write access to the reader configuration. The password can
be from 8 to 32 characters long. You must always specify a
password. Default is
intermec
.
17
Advertisement
Table of Contents
