Wall Mounting Kit; Install The Wall Mount - Honeywell IF1C User Manual

Icon

Wall Mounting Kit

The wall mounting or VESA mounting kit allows you to mount the reader to a flat
surface. It is sold and ordered separately. To order accessories, contact your local
sales representative.

Install the Wall Mount

To maintain the IP66 rating of the reader, you must mount the reader correctly.
1. Choose a mounting location.
2. Connect an earth ground cable to the RFID reader.
IF1C Fixed RFID Reader User Guide
Name Color
RFID Solid green
antenna
Blinking green
Blinking red
Off
Ethernet Solid green
Flickering green
Blinking green
and orange
Blinking red
Off
Description
RF field is active
A tag is being interrogated.
The reader cannot output the requested RF power level,
or an RF fault is detected.
The RFID radio is not powered.
The reader is powered, an Ethernet link is established,
and the host is connected.
Packets of information are being sent through the
Ethernet port.
An Ethernet link is established, but there is no host
connection.
The reader is powered, but an Ethernet link is not
established.
The reader is not powered.
3