D-Link AC1200 Mesh User Manual page 35

Section 3 - Configuration
IPv6 - Autoconfiguration (SLAAC/DHCPv6)
Select Autoconfiguration (SLAAC/DHCPv6) to have the
My Internet Connection
is DAP-1610 automatically receive an IPv6 address from the
uplink router.
Obtain a DNS server
You can select to obtain IPv6 DNS server information
address automatically
automatically, or you can select to configure DNS servers
manually by selecting next to the option Use the following
DNS address.
Primary DNS Server
For manual settings, enter the primary IPv6 DNS server address.
Secondary DNS Server
For manual settings, enter the secondary IPv6 DNS server
address. This is optional but will provide backup if the primary
server fails.
Select Static IPv6 to manually assign an IP address to the
My Internet Connection
is DAP-1610.
IPv6 Address Enter the IPv6 address that you want to assign to the extended
network AP. This address should be outside of the uplink
router's DHCP address pool.
Subnet Prefix Length
Enter the length of the IPv6 subnet prefix.
Default Gateway
Enter the default gateway.
Primary DNS Server
Enter the primary IPv6 DNS server address.
Secondary DNS Server
Enter the secondary IPv6 DNS server address. This is optional
but will provide backup if the primary server fails.
IPv6 -
Select Local Connectivity Only to set an IPv6 address only
My Internet Connection
is for the local network.
LAN IPv6 Link-Local The link-local address of the DAP-1610.
Address
D-Link DAP-1610 User Manual
IPv6 - Static IPv6
Local Connectivity Only
32