D-Link AC1200 Mesh User Manual page 33

Wi-fi range extender

Hide thumbs Also See for AC1200 Mesh:

Table of Contents

Section 3 - Configuration

Wireless - Smart Connect Disabled (Continued)

Status

Enable or disable the 5 GHz network by toggling this slider.

Wi-Fi Name (SSID)

This is the name of the DAP-1610's extended network. If

using Wi-Fi, the DAP-1610 will rebroadcast the uplink router's

Internet connection under this SSID. You may also manually

set the SSID of the extended network.

Password

Enter the password or network key that you wish to use for

the extended 5 GHz network.

Security Mode

Choose None, WPA3-Personal, WPA2/WPA3-Personal, WPA2-

Personal or WPA/WPA2-Personal.

802.11 Mode

Select the desired wireless networking standards to use. The

available options for the 5 GHz wireless network are Mixed

802.11a/n/ac, Mixed 802.11a/n, 802.11ac only, 802.11 only,

802.11n only.

Schedule

Use the drop-down menu to select the time schedule that the

rule will be enabled for. The schedule may be set to Always

Enable (default) or a custom can be created by clicking the

+ button then selecting "add" and specifying the times the

radio will be active.

D-Link DAP-1610 User Manual

5 GHz Extended Wi-Fi

Table of Contents