Baffle Assy Block-1 - Sony SA-Z9R Service Manual

Note: Follow the disassembly procedure in the numerical order given.
2-2.

BAFFLE ASSY BLOCK-1

• Continued on 2-3 (page 8).
1 three screws
(BVTP3.5 10)
right side
rear side
1 three screws
(BVTP3.5
6 Remove the baffle assy
block in the direction
of the arrow.
cabinet block
Attach in order from 1 to 4.
2 Install the baffle assy block
in the direction of the arrow.
baffle assy block
cabinet block
leg
rear side
screw hole
1 Insert the leg to the back of the
screw hole on the baffle assy.
top side
front side
3 two screws
(BVTP3
10)
2 two feet
baffle assy block
screw
hole
leg
7 Draw out the leg from the
back of the screw hole on
the baffle assy.
3 Slide the baffle assy
block in the direction
of the arrow.
front side
left side
8)
left side
screw
hole
4 Push in the baffle assy block
in the direction of the arrow.
SA-Z9R
baffle assy block
4 Pull out the baffle assy
block in the direction
of the arrow.
5 Slide the baffle assy
block in the direction
of the arrow.
7