Ge3A/Ge2B (Power) Boards, Buhs Board, And Lcd Panel Removal - Sony KDL-40NX700 Service Manual

1-4. GE3A/GE2B (POWER) BOARDS, BUHS BOARD, AND LCD PANEL REMOVAL

A Remove screws from Power Boards.
4 from GE3A Board (KDL-40NX700 ONLY)
5 from GE2B Board (KDL-46NX700 ONLY)
B Disconnect 5 connectors from Power Boards.
C Slide Terminal Bracket to left-side to remove from BUHS Board.
D Remove 8 screws from BUHS Board.
E Disconnect 5 connectors from BUHS Board.
F Slide Side Jack Bracket to right-side to remove from BUHS Board.
G Carefully Lift up Panel to remove from Bezel.
CAUTION: Refer to page 4, Handling the Glass Assembly, for cautions regarding replacing the
Glass Assembly.
KDL-40NX700/46NX700
G
F
E
D
C
B
A
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
NOTE: The components identified by shading
une marque
and ! mark are critical for safety. Replace only
Ne les remplacer que par une piece portant le
with part number specified.
numero specifie.
(Check the Sony Electronics Service Information
REF. NO. PART NO. DESCRIPTION
151 A-1773-991-A GLASS (40MAR) ASSEMBLY
(KDL-40NX700 ONLY)
151 A-1773-992-A GLASS (46MAR) ASSEMBLY
(KDL-46NX700 ONLY)
152 N/A LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
153 X-2547-018-1 BRACKET, SIDE JACK T ASSEMBLY
154 A-1765-668-A BUHS BOARD, COMPLETE
NOTE: For BUHS Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BUHS Board or LCD Panel.
NOTE: The components identified by a red outline and a
sont critiques pour la securite.
! confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
website for any additional service related issues for this model.)
151
152
153
154
155
156
[ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION
NOTE: Final software is not installed on this BUHS Board.
Install the update after replacing this board using the instructions
provided with the software.
155 4-172-021-21 BRACKET, TERMINAL T (for US/CND MODELS ONLY)
155 4-172-021-51 BRACKET, TERMINAL T (for MX/LA MODELS ONLY)
156 1-474-213-11 GE3A (POWER) BOARD, COMPLETE
(KDL-40NX700 ONLY)
156 1-474-212-11 GE2B (POWER) BOARD, COMPLETE
(KDL-46NX700 ONLY)
2-580-592-01 SCREW, +PSW M3X8
mark contain
[ASSEMBLY INCLUDES]
15