Sony HBD-TZ215 Service Manual page 51

Pin No. Pin Name
157 REGRST
158 MUTE
159 DDC_DA
160 DVDD18
161 DDC_CLK
162 HTPLG
163 AGND3
164 EXT_RES
165, 166 AVDD3
167 EXT_CAP
168, 169 AGND3, AGND18
170 TXCN
171 TXCP
172 AVDD18
173 TX0N
174 TX0P
175 AGND18
176 TX1N
177 TX1P
178 AVDD18
179 TX2N
180 TX2P
181 AGND18
182 R/Cr/Pr
183 B/Cb/Pb
184 DACVSSA
185 Y/G
186 DACVDDA
187 CVBS
188 DACVSSB
189 C
190 DACVDDB
191 Y
192 DACVSSC
193 FS
194 VREF
195 DACVDDC
196 VBUS_OE
197 VBUS_OC
198 SCORE/DIR_XSTATE
199 SPMCK
200 SPBCK
201 SPLRCK
202 ADIN (SPDATA)
203 ACLK
204 ABCK
205 ALRCK
206 MC_DATA (ADIN)
207 DVDD3
208 MIC
209 WIDE
210 RGB_SEL/DSEL
211 TRG_SW
212 DVDD18
213 KMOD
214 XVOICE/DIR_CSFLAG
215 SPDIF
216 APLLVDD3
217 APLLCAP
I/O
O REG reset signal output for Focus/Tracking/Sledding motor driver
O Mute signal output for Spindle motor
I/O HDMI DDC line data input/output
— Power supply (+1.8V)
I/O HDMI DDC line clock input/output
I HDMI HPD signal input
— Ground
— Ext. resistor connected terminal
— Power supply (+3.3V)
— Ext. capacitor connected terminal
— Ground
O HDMI TXD-clock output
O HDMI TXD-clock output
— Power supply (+1.8V)
O HDMI TXD-0 output
O HDMI TXD-0 output
— Power supply (+1.8V)
O HDMI TXD-1 output
O HDMI TXD-1 output
— Power supply (+1.8V)
O HDMI TXD-2 output
O HDMI TXD-2 output
— Power supply (+1.8V)
O Video chroma R/Cr/Pr signal output
O Video chroma B/Cb/Pb signal output
— Ground
O Video Y/chroma G signal output
— Power supply (+3.3V)
O Video Composite signal output
— Ground
O Video chroma signal output
— Power supply (+3.3V)
O Video Y signal output
— Ground
I Full Scale Adjustment setting terminal
I Reference Voltage input terminal
— Power supply (+3.3V)
O VBUS power control signal output
I VBUS over current detect signal input
— Not used. (Connected to ground)
— Not used. (Connected to ground)
— Not used. (Connected to ground)
— Not used. (Connected to ground)
— Not used. (Connected to ground)
O A/D converter and DAMP clock output
O A/D converter and DAMP BCK clock output
O A/D converter and DAMP LRCK clock output
I A/D converter digital data input
— Power supply (+3.3V)
— Mic detect status signal input
O WIDE select signal output
O Video output select signal output
I Not used. (Pull up)
— Power supply (+3.3V)
O KARAOKE mode information signal output
— Not used. (Connected to ground)
O Not used. (Open)
— Power supply (+3.3V)
— Ext capacitor connected terminal
Description
(Not used in this unit)
(Not used in this unit)
(Not used in this unit)
(Not used in this unit)
(Not used in this unit)
Not used. (Connected to ground)
(Not used in this unit)
(Not used in this unit)
(Not used in this unit)
HBD-TZ215/TZ715
51