Advertisement
Table of Contents
- 1 Table of Contents
- 2 Welcome
- 3 Carbon Monoxide(CO) Overview
- 4 Product Overview and Specification
- 5 Understanding Your CO Alarm
- 6 Installation Instructions
- 7 General Maintenance
- 8 Warranty Information
- 9 Manufacturer and Servicing Information
- 10 Warranty Card
- 11 What to Do When the Alarm Sounds
- Download this manual
Advertisement
Table of Contents
Related Manuals for Siterwell GS811-A
Summary of Contents for Siterwell GS811-A
- Page 1 CARBON MONOXIDE ALARM USER’S MANUAL MODEL No.: GS811-A SITERWELL GS811-A MANUAL Rev.D 1 / 19...
-
Page 2: Table Of Contents
3. Product Overview and Specification: ----------------------------------6/18 4. Understanding your CO alarm: ---------------------------------------7/18 5. Installation instructions:--------------------------------------------------10/18 6. General maintenance: ----------------------------------------------------14/18 7. Warranty Information-----------------------------------------------------15/18 8. Manufacturer and Servicing information:------------------------------16/18 9. Warranty Card---------------------------------------------------------------17/18 10. What to do When the Alarm Sounds: ----------------------------------18/18 GS811-A MANUAL Rev.D 2 / 19... -
Page 3: Welcome
The CO alarm GS811-A is designed to detect carbon monoxide from ANY source of combustion. It is NOT designed to detect smoke, fire, or any other gas. CO alarm GS811-A is not a substitute for installing and maintaining an appropriate number of smoke alarms in you home. -
Page 4: Carbon Monoxide(Co) Overview
ALL members of the household: 2.2.1 Mild Exposure: Slight headache, nausea, vomiting, fatigue(often described as "Flu-like" symptoms). 2.2.2 Medium Exposure: Severe throbbing headache, drowsiness, confusion,fast heat rate. 2.2.3 Extreme Exposure: GS811-A MANUAL Rev.D 4 / 19... - Page 5 2) Extended operation of unvented fuel burning devices (range, oven, fireplace, etc.). 3) Temperature inversions which can trap exhaust gasses near the ground. 4) Car idling in an open or closed attached garage, or near a home. GS811-A MANUAL Rev.D 5 / 19...
-
Page 6: Product Overview And Specification
End of life warning silence: about 48 hours Note: This CO alarm is designed to detect carbon monoxide gas from ANY source of combustion. It is NOT designed to detect smoke, fire or any other gas. GS811-A MANUAL Rev.D 6 / 19... -
Page 7: Understanding Your Co Alarm
The red LED flashes and the horn chirps once every 30 seconds. It indicates the CO alarm is in malfunction condition. Replace battery, if condition continues, the CO alarm has malfunctioned. Replace immediately. The malfunction alarm will not respond CO. GS811-A MANUAL Rev.D 7 / 19... - Page 8 This signal shall be repeated until the alarm resets after dissipation of CO or the alarm signal is manually silenced. Important : If the alarm sounds, it should be treated as a potentially serious condition. See “ 10 What to do When the Alarm Sounds ! ” GS811-A MANUAL Rev.D 8 / 19...
- Page 9 NOTE: Test the unit weekly! If at any time your unit does not perform as described, replace it immediately. NOTE: Due to the loudness of the alarm, we suggest that you place your fingers over the sounder opening while testing your alarm. GS811-A MANUAL Rev.D 9 / 19...
-
Page 10: Installation Instructions
·Install in a bedroom or hallway located close to the sleeping area. Take special care to verify the alarm can be heard in sleeping areas. ·It is recommended that a CO alarm be installed on each level of a multilevel GS811-A MANUAL Rev.D 10 / 19... - Page 11 To install or replace the battery in unit, please perform the following steps: 5.3.1 Take down the unit from screw heads of the wall. 5.3.2, Take down the old batteries, then make the power input connector be connected to the new alkaline battery. (see Figure3 ) GS811-A MANUAL Rev.D 11 / 19...
- Page 12 As you install the battery on the unit, maybe it will sound for several minutes, then stop and enter in normal operation mode. If it always sounds, please call our agent. Battery box Figure 3 GS811-A MANUAL Rev.D 12 / 19...
- Page 13 GS811-A MANUAL Rev.D 13 / 19...
-
Page 14: General Maintenance
XX6. General Maintenance: CAUTION: The CO alarm GS811-A is designed for indoor use only. DO not expose to rain or moisture. DO not knock or drop the detector. DO not open or tamper with the alarm as this could cause malfunction. -
Page 15: Warranty Information
This warranty does not restrict your legal rights. NOTE: In the event of a warranty claim, please return the till receipt and completed warranty card with fault description together with the defective device. GS811-A MANUAL Rev.D 15 / 19... -
Page 16: Manufacturer And Servicing Information
8. Manufacturer and Servicing information: Manufactured by SITERWELL. For servicereturn to seller or SITERWELL: Manufacturer: NINGBO SITERWELL ELECTRONICS CO., LTD Address: NO.76 HAICHUAN ROAD CHUANGYE ZONE B, JIANGBEI, NINGBO, CHINA Tel: 0086-574-83076656 Fax: 0086-574-83076652 E-mail: Sales@china-siter.com Seller information: Seller: Address:... -
Page 17: Warranty Card
XX9. Warranty Card: Last Name: First Name: Address: Zip Code: Country: City: Phone: Fault description: GS811-A MANUAL Rev.D 17 / 19... -
Page 18: What To Do When The Alarm Sounds
2 Call your emergency services (Fire Department or 911). Phone Number: 3 Immediately move to fresh air outdoor or by an open door/window. Do a head count to check that all persons are accounted. Do not reenter the premises nor GS811-A MANUAL Rev.D 18 / 19... - Page 19 If the CO condition that caused the alert in the first place continues, the alarm will reactivate. If the unit alarms again within six minutes, it is sensing high levels of CO which can quickly become a dangerous situation. GS811-A MANUAL Rev.D 19 / 19...
Need help?
Do you have a question about the GS811-A and is the answer not in the manual?
Questions and answers
As soon as I install the smoke and CO detector onto the mount, it starts to beep
The Siterwell GS811-A CO alarm may beep immediately after installation because the battery is being inserted, which can cause the alarm to sound for several minutes before stopping and entering normal operation mode. If the alarm continues to sound, it may indicate a problem, and the user is advised to contact the manufacturer or agent.
This answer is automatically generated
When I try to install the alarm on the mounting bracket, it won't stop alarming
The Siterwell GS811-A alarm may keep alarming during installation because it is designed to detect carbon monoxide and alert users when dangerous levels are present. However, if it alarms continuously when mounting, possible reasons include:
1. Test Mode Activation – Pressing the TEST/RESET button as part of the installation process may trigger the alarm.
2. Improper Installation – If the unit is not securely hooked onto the screws, it may not function correctly.
3. Environmental Factors – Nearby sources of combustion or poor ventilation may cause the alarm to detect carbon monoxide.
4. Battery Issues – If the battery is low or incorrectly installed, the unit may sound a warning.
5. Faulty Unit – If the alarm continues to sound despite correct installation and a safe environment, it may be defective.
To resolve the issue, ensure proper installation, check the battery, and press the TEST/RESET button. If the alarm persists, consider contacting the manufacturer or a qualified technician.
This answer is automatically generated
38ppm is the code it keeps beeping and is blue