Removing The Side Plates And Front Cover - Asus Vintage AH1 User Manual

2.3 Removing the side plates and
front cover
The system has two chassis side plates, each one secured by two screws
located on the rear panel.
To remove the chassis side plate:
1. Turn each screw counterclockwise to release the side cover. Set the
screws aside.
2. Slide the side panel for about half an inch toward the rear until it
disengages from the chassis.
1
2
1
3. Repeat steps 1 and 2 to remove the other side plate cover.
4. Release the side lock tabs from the steel railing.
5. Swing the left edge of the front panel outward.
6. Unhook the hinge-like tabs from the holes on the right side of the
front panel to completely detach the front panel assembly from the
chassis.
A S U S V i n t a g e - A H 1 A S U S V i n t a g e - A H 1 A S U S V i n t a g e - A H 1 A S U S V i n t a g e - A H 1 A S U S V i n t a g e - A H 1
S t e e l r a i l i n g S t e e l r a i l i n g
S t e e l r a i l i n g S t e e l r a i l i n g S t e e l r a i l i n g
H i n g e - l i k e t a b H i n g e - l i k e t a b
H i n g e - l i k e t a b H i n g e - l i k e t a b H i n g e - l i k e t a b
4
4
4
6
6
6
5
S i d e l o c k t a b S i d e l o c k t a b
S i d e l o c k t a b S i d e l o c k t a b S i d e l o c k t a b
2 - 3 2 - 3 2 - 3 2 - 3 2 - 3