Table of Contents
Advertisement
5.
Connect one end of the Serial ATA cable to the SATA connector at
the back of the drive, then connect the other end to a Serial ATA
connector on the motherboard. See page 4-6 for the location of the
Serial ATA connectors.
6.
Connect a 15-pin Serial ATA power plug from the power supply unit to
the power connector at the back of the drive.
Connect a 4-pin (female) power plug from the power supply unit to
the 4-pin (male) power connector at the back of the drive.
If your Serial ATA HDD has both 4-pin and 15-pin connectors at the
back, use either the 15-pin SATA power adapter plug O R
4-pin power connector. D O N O T
components and to keep the system from becoming unstable.
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
A S U S V i n t a g e - A H 1
S e r i a l A T A
S e r i a l A T A
S e r i a l A T A
S e r i a l A T A
S e r i a l A T A
p o w e r c a b l e
p o w e r c a b l e
p o w e r c a b l e
p o w e r c a b l e
p o w e r c a b l e
- O R -
- O R -
- O R -
- O R -
- O R -
D O N O T use both to prevent damage to
D O N O T
D O N O T
D O N O T
S e r i a l A T A c a b l e
S e r i a l A T A c a b l e
S e r i a l A T A c a b l e
S e r i a l A T A c a b l e
S e r i a l A T A c a b l e
O R
O R
O R the legacy
O R
2 - 1 7
2 - 1 7
2 - 1 7
2 - 1 7
2 - 1 7
Advertisement
Table of Contents
