5.4.4 Onboard device configuration
The items in this menu show the onboard device configuration settings.
Select an item then press <Enter> to display a pop-up menu with the
configuration options.
Onboard Device Configuration
IDE Function Setup
USB Configuration
Onboard NV LAN
Onboard LAN Boot ROM
Onboard IEEE 1394
HD Audio
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
x ECP Mode Use DMA
IDE Function Setup
IDE Function Setup
OnChip IDE Channel0
IDE DMA transfer access
SATA Port 1, 2
SATA DMA transfer
IDE Prefetch Mode
OnChip IDE Channel0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller.
Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access function.
Configuration options: [Disabled] [Enabled]
ASUS Pundit P1-AH1
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[Standard]
3
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Menu
Item Specific Help
Press [Enter] to
set.
Select Menu
Item Specific Help
Disable/Enable
OnChip IDE Channel
O.
5-19