Recovering The Bios With Crashfree Bios 2 - Asus Pundit P1-AH1 User Manual

EZFlash starting BIOS update
Checking for USB floppy...
4. Insert the flash disk that contains the BIOS file to a USB port. (If using
a floppy disk, make sure it is inside the USB floppy drive and the USB
cable is connected to a USB port) . When the correct BIOS file is
found, EZ Flash performs the BIOS update process and automatically
reboots the system when done.
EZFlash starting BIOS update
Checking for USB floppy...
USB floppy found!
Reading file "A8N8L.BIN". Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
• Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
• A "USB floppy not found!" error message appears if there is no
floppy disk in the drive. An "A8N8L.BIN not found!" error message
appears if the correct BIOS file is not found in the USB floppy disk.
Make sure that you rename the BIOS file to A8N8L.BIN.

5.1.2 Recovering the BIOS with CrashFree BIOS 2

The CrashFree BIOS 2 auto recovery tool allows you to restore BIOS from
the motherboard support CD, or from a USB floppy disk or flash disk that
contains the BIOS file, in case the current BIOS on the motherboard fails
or gets corrupted.
• Prepare the support CD that came with the motherboard that
contains the motherboard BIOS (A8N8L.BIN) before proceeding
with the BIOS update process.
• If you have saved a copy of the original motherboard BIOS to a
bootable USB floppy disk or USB flash disk, you may also use this
disk to restore the BIOS.
ASUS Pundit P1-AH1 5-3