Cleaning Nozzle And Check/Refill Ice - Coca-Cola Freestyle 7000 User Manual

maintenance

cleaning nozzle and check/refill ice

How to properly clean the Coca-Cola
Freestyle® nozzle and injector ring
Locate the nozzle. Using a clean cloth to protect
your fingers, twist nozzle counter-clockwise, and
then pull down to remove.
Scrub the nozzle at a 45° angle with detergent
cleanser using an approved nozzle brush (Coke part
#149326).
Rinse nozzle in warm, clean, drinkable water.
Place nozzle in approved sanitizer solution (Kay-5).
Shake nozzle tip when submerging to remove any
air bubbles and soak the nozzle for no more than
5 minutes. CAUTION: DO NOT SOAK NOZZLES
OVERNIGHT!
Scrub underneath the injector ring (area where
the nozzle connects) using the nozzle & injector
ring brush at a 45° angle and a clean cloth. For the
nozzle upper ring, scrub using the pointed end of
the nozzle & injector ring brush. Focus at the small
holes where ingredient comes out. Use the blunt
end of the brush for the nozzle tip. Allow to sit for 2
minutes. Then repeat with clean sanitizing solution.
Allow the nozzle and injector ring area to "AIR
DRY", then use a clean cloth to reinstall nozzle and
lock into place turning clockwise.
NOTE:
Take extra care to ensure the nozzle is inserted
completely and locked into place.
© 2019 The Coca-Cola Company | Coca-Cola Freestyle® 7000 User Guide | Confidential information of The Coca-Cola Company | v1.190510
How to check/fill ice
Maintaining the proper ice level is critical
to ensuring your guest receives a quality
beverage. If using a top-mount ice maker,
follow established procedures for checking ice
level. If you fill the ice manually, check to
ensure ice is at least 1/3 full at all times. Fill the
ice bin by following the steps illustrated below:
Fill a clean bucket with ice.
Safely lift and remove ice bin lid.
Dump the ice in the ice bin and fill until full.
(approximately 2" from the top – do not overfill)
Replace ice bin lid.
NOTE: Store bought or "bagged ice"
seriously damage the Coca-Cola Freestyle® 7000 dispenser ice bin.
full
2/3 full
1/3 full
Ice bin should NEVER be less
than one-third full
SHOULD NEVER BE USED
as it may
13
|