Safety Instructions
ENG WARNING – RISK OF FIRE AND ELECTRIC SHOCK.
SUITABLE FOR DRY LOCATIONS ONLY
FR
ATTENTION – RISQUE D'INCENDIE, RISQUE DE CHOC.
POUR EMPLACEMENTS SECS SEULEMENT
These instructions are provided for your safety in order to prevent the risk of Fire, Electric
shock or Injury. Please retain for future reference. When fitting is in operation, some parts
will become hot; take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to
overtighten lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old
lamps carefully.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the
position of the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting
must be unplugged from the power supply immediately and not operated until the
damaged parts are fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact
with any liquids.
Cleaning and Maintenance
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or
abrasives. Glass can be cleaned using a soft damp cloth with a mild detergent or suitable
glass cleaner if necessary. Switch off power to the fitting before cleaning. Spare parts are
available for this product, please see contact details on the reverse.
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxford from high quality components, produced in the UK.
ORIGINALBTC.COM
+44 (0)1993 882 251
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Primo Table & Floor
v1.2- 05.19
Instruction Manual
KEY
L
BROWN
L =
Live
Fitting
GRN/YEL
N =
Neutral
=
Earth
N
BLUE
LAMP GUIDANCE
MADE IN BRITAIN
MADE IN BRITAIN
KEY
*After 2004, wiring installation colours changed:
L
BROWN
BROWN
Primo Floor Light
L =
Live
*Mains
LIVE
Brown replaces Red
GRN/YEL
Fitting
US-FF463N
GRN/YEL
N =
Neutral
Supply
EARTH
Green/Yellow sleeving
=
N
BLUE
Earth
NEUTRAL Blue replaces Black
BLUE
MADE IN BRITAIN
US-FF463N / US-FT311
*After 2004, wiring insta
BROWN
Primo Table Light
*Mains
LIVE
Brown re
GRN/YEL
US-FT311
Supply
EARTH
Green/Ye
BLUE
NEUTRAL Blue repla
Need help?
Do you have a question about the Primo Table and is the answer not in the manual?
Questions and answers