Download Print this page
Sanela SLP 32R Mounting Instructions

Sanela SLP 32R Mounting Instructions

Automatic urinal radar flushing system

Advertisement

Quick Links

Function
minimum use time 10 sec.
Supplied equipment
SLP 32R - Code Nr. 01324, SLP 33R - Code Nr. 01334
Installation
3
8
1
length of
5
vertical plumbing
min 150 m m
7
4
Recommended accessories
SLZ 01Y
SLZ 01Z
SLD 04
SLZ 04Y
SLZ 04Z
ISO 9001:2000
Automatic urinal radar flushing system SLP 32R, SLP 33R
2
1 - water inlet to the urinal
2 - electronics with radar senzor
3 - outlet fiting with sealing
4 - waste outlet Ø 50 mm
5 - power input 24 Vss
6 - urinal
7 - waste siphon
8 - electromagnetic valve
External power supply 230/24V DC, for connection of max. 3 flushing units
External power supply 230/24V DC, for connection of max. 5 flushing units
Remote control for the parameters adjustment
External power supply 230/24V DC, for mounting on DIN rail to the switch-board and for connection of
max. 3 flushing units
External power supply 230/24V DC, for mounting on DIN rail to the switch-board and for connection of
max. 5 flushing units
Mounting instructions
Properties
flushing time 0,5 - 15,5 sec
after 6 hours non use
1
SLP 32R = 200
SLP 33R = 240
Ø = 14
24 Vss
Ø 50 mm
waste
outlet
using time 6 - 15 sec
water inlet
Ø = 14
150

Advertisement

loading

Summary of Contents for Sanela SLP 32R

  • Page 1 6 - 15 sec minimum use time 10 sec. after 6 hours non use Supplied equipment SLP 32R - Code Nr. 01324, SLP 33R - Code Nr. 01334 Installation SLP 32R = 200 SLP 33R = 240 water inlet Ø...
  • Page 2 3/4“ 24 V DC 10 sek ONE AUTOMATIC FLUSH Service It is recommend to check up the sifter of electromagnetic valve once a year, because of there is a possibility that valve could be fouled up. Checking of tightening of screw conections and connectors contact surfaces is also recommend once a year. All stainless steel components should be cleaned only by water soap and soft rag.

This manual is also suitable for:

Slp 33r0132401334