Mitsubishi Electric MELSEC-Q Series User Manual page 30

Hide thumbs Also See for MELSEC-Q Series:

Table of Contents

(d) Write the Ethernet parameters and programs to the CPU module, and restart the

CPU module.

When it is operating normally, the initial processing of the Ethernet module will be completed normally and the

[INIT. ] LED will be lit.

(3) Execution environment of the above data communication example (external

device side)

(a) Web server

• Set up the communication library and the sample screen. ( Page 22, Section 3.2 (2))

• Register the DLL file in the OS registry. ( Page 22, Section 3.2 (2)) This registration is not required if it

has already been registered.

• After all settings are completed, restart the Web server.

(b) Web browser

Start the Web browser.

(4) Execution of data communication

(a) URL display on the sample screen

Specify the following URL for the sample screen in the Web browser.

10.97.85.10/_qj71e71/index.html

(b) Unlocking the remote password

If the port of the Ethernet module using for data communication with the Web server is subject to remote

password check, the following dialog box will be displayed when access to a CPU module will start.

Enter the remote password to perform unlock processing.

This operation is not required if the port of the Ethernet module is not subject to remote password check. (Therefore, the

following dialog box will not be displayed.)

For an example of data communication, refer to Page 29, Section 4.4.1 and subsequent sections.

(d) End of data communication

Close the Web browser.

Table of Contents