Zanussi ZTE270 Instruction Booklet page 24

125987721_EN.qxp 2007-07-02
Important:
Reversing the door is not possible if after this
operation the appliance result installed behind a
door with a hinge on the opposite side to that of
the appliance.
This operation must be carried out by qualified
personnel. Please contact the nearest Service
Centre.
24
09:38 Page 24
Electrical connection
This machine is designed to operate on a 230 V,
single-phase, 50 Hz supply. Check that your
domestic electrical installation can take the
maximum load required (2.35 kW), also taking
into account any other appliances in use.
Connect the machine to an earthed socket, in
accordance with current wiring regulations.
Important:
The manufacturer declines any responsibility
for damage or injury through failure to
comply with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this must be carried out
by our Service Centre.
Important:
The power supply cable must be accessible
after installing the machine..