Palazzetti Ecofire Series Use And Function page 21

3 PRELIMINARY
OPERATIONS
3.1 LOADING THE PELLETS
The first operation to be performed before starting
the appliance is to fill the hopper with fuel (pellets).
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets. A safety switch (just for
the models that are equipped with it) makes sure
that the pellet tank lid has been closed properly (IS
in fig. 3.1) and triggers a stove alarm in case the
pellet tank lid stays open for more than one minute
while the stove is still working.
3.2 POWER SUPPLY
Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
"I" (Fig. 3.2). If the connections are correct the
stove will emit a series of intermittent beeps, the
display will come on.
Make sure not to touch the control panel while
plugging the stove into the power supply.
If not using the appliance for an extended period,
the switch at the rear of the stove should be moved
to position (O).
3.3 INITIAL SETTINGS
The language, current date and time need to be
set before using the stove.
3.3.1 Time and Date setting
To set the date:
a) Use the
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d) The hour value will flash; set the value using the
e) The minutes value will flash; set the value using the
f) The day value will flash; set the value using the
g) The month value will flash; set the value using the
h) The year value will flash; set the value using the
i) The current weekday value will flash (Monday = 1... Sunday = 7); set the value using the
j) Press to confirm the settings.
buttons to go to the setup menu
IS
and press ;
to confirm;
[3]
and press to confirm;
buttons and press
buttons and press
buttons and press ;
buttons and press
buttons and press
fig. 3.1
fig. 3.2
;
;
;
;
buttons;
21