GEA HGX2 CO2 T Series Repair Instruction page 10

Assembly
4 Assembly
We recommend cleaning the inside of the case before the installation.
There must not be any particles and dirt in the compressor.
To assemble, reverse the order of the steps. Note any particular features such as observance of different torques.
4.1 Connecting the stator to the motor housing
¾
Assembly instructions for HGX46 CO
WARNING
The heavy weight of the stator can potentially be dangerous; risk of falling, danger of crushing.
Use a suitable hoist for the removal.
X
Note the direction of the feather key — stator.
X
You must align the parts in order to install them.
¾
Align the stator so that the cable harness is positioned upwards and the feather key is aligned with the groove of the
stator.
Do not damage any cables and components.
X
10
T up to design key A053, see page 13.
2