Whale Instant Match SDS131T Quick Connect Manual page 3

2. Transformer set up
• Switch the mains electric supply to the transformer ON.
The light on the transformer will now flash red to indicate
that a wireless connection has not yet been established.
• Press and HOLD the yellow test button on the transformer
until the light flashes red and green to indicate that the
transformer is now in pairing mode.
NOTE: You now have 120 seconds to pair the transformer
to the shower.
3. Shower set up
• Ensure that the electric supply to the shower is turned OFF.
Then turn the dial on the shower to FULL COLD.
4. Configuring the shower
• Switch the mains electric supply to the shower ON.
• Press the Start/Stop button on the shower. The Mira
shower and wireless transformer will now pair automatically
• The green LED on the transformer will now flash green.